Ballistic Protection Refined
Premium Ballistic Protection Systems
Engineered for discretion. Crafted with precision.
ProAVX Tactical delivers non-invasive, ultra-lightweight armoring solutions for executive and luxury vehicles. Our patented material systems achieve certified B4-B7 ballistic protection without altering your vehicle's appearance, performance, or factory warranty.
NIJ Certified Materials
Independently Tested
B4 - B7 Protection Levels
CEN 1063 Compliant
DOT Approved Glass
Made in USA
NIJ Certified Materials
Independently Tested
B4 - B7 Protection Levels
CEN 1063 Compliant
DOT Approved Glass
Made in USA
Advanced Material Technology
Protection That Doesn't Compromise
ProAVX Tactical was founded on a singular conviction: ballistic protection should not require sacrificing the vehicle's performance, appearance, or occupant comfort. Our engineers developed a patented material system that achieves certified ballistic resistance at unprecedented weight savings.
Where conventional armored vehicles add 400-900 kg of steel plate through invasive structural modification, a complete ProAVX Tactical system starts at 90 kg and requires zero permanent alteration to the vehicle. The result: a protected vehicle that handles, accelerates, and stops exactly as the manufacturer intended.
- Ultra-lightweight preformed panels
- Zero vehicle modifications
- Independently laboratory tested
- 10 Year manufacturing warranty on ballistic plates
How ProAVX Compares
Traditional Armoring
- 400-700 kg added weight
- Permanent structural modification
- Degraded performance & handling
- Visible exterior changes
- Weeks-long installation process
- Voids factory warranty
ProAVX Tactical System
- Starting at 90 kg total system weight
- Zero permanent modification
- Performance fully maintained
- Indistinguishable appearance
- 12+ hour installation target
- Factory warranty compatible
Core Systems
Protection Systems
Three integrated systems, engineered to work as a unified protection envelope covering every critical occupant zone.
Ballistic Glass
Optically clear transparent ballistic glazing engineered to replace factory glass with zero distortion. DOT-approved and CEN 1063 certified, our laminate system maintains the vehicle's original appearance while delivering Level B4-B7 protection.
- DOT Approved
- Zero optical distortion
- B4-B7 rated
- 100% transparent
Ballistic Panels
Ultra-thin patented ballistic panels installed behind interior trim with no cutting or drilling. Our proprietary material stack achieves stopping power equivalent to steel at a fraction of the weight, preserving cargo volume and vehicle dynamics.
- Zero structural modifications
- Steel-equivalent stopping power
- Interior trim preserving
- Patented ballistic stack
Run-Flat Tires
Our advanced ballistic armoring utilizes cutting-edge ultralight technology, ensuring your vehicle’s total payload capacity remains uncompromised. Because our system is exceptionally lightweight and requires no structural modifications, you can continue to utilize the manufacturer’s recommended run-flat tires without the need for bulky, inconvenient inserts. Furthermore, our 100% OEM-integrated design ensures that all original electronic functionalities remain fully operational and factory warranties stay intact.
- 80 km/h sustained speed
- 80 km post-puncture range
- Factory wheel compatible
- TPMS sensor compatible
Material Specifications
Ballistic Materials
Opaque Ballistic Material
Our opaque protection consist of ultralight preformed ballistic panels. The system achieves level BR 4 thru BR 6 on the European CEN 1063 ballistic standard at a panel thickness of 4~16 mm - a fraction of the profile required by steel equivalents.
- Protection Level
- European CEN 1063 BR4 thru BR6
- Panel Thickness
- 4mm ~ 16mm
- Aereal Density
- 200~900 grams/m2
- Testing Standards
- European CEN 1063
Coverage Area
- Front doors
- Back doors
- A,B and C pillars
- Roof
- Engine compartment
- Cargo area
Transparent Ballistic Material
Our transparent glazing system uses cutting edge technology engineered to achieve and exceed OEM glass optical clarity while providing certified ballistic resistance. Each pane is DOT approved and carries zero optical distortion at any viewing angle and is 100% transparent.
- Protection Level
- CEN1063 level BR 4 thru BR 7
- Glass Thickness
- 12 ~ 26mm
- Optical Clarity
- 100%
- Certifications
- DOT and CEN 1063
Coverage Areas
- Windshield (front)
- Side door glass (all rows)
- Rear windshield
- Sunroof panel (optional)
- Quarter glass
Exterior Systems
Exterior Armour
ProAVX Tactical exterior armour panels integrate directly behind factory body panels and door skins, eliminating the need to modify or replace exterior sheet metal. The result is a vehicle indistinguishable from its factory configuration - no tell-tale weight stance, no widened wheel arches, no visible seams.
Door Panel Integration
Panels fit within existing door cavities. Existing windows, seals, and hardware retained.
Pillar Protection
A, B, and C pillar wrap coverage included. Factory trim panel preserved over panels.
Overhead Ballistic Protection
Ultra-lightweight roof armor, engineered to provide high-level ballistic protection without compromising vehicle handling or center of gravity.
Overlap Geometry
Panel edges are engineered to overlap at all joints, eliminating ballistic exposure gaps.
Transparent Protection
Glass Protection
The weakest point of any armored vehicle is its glass. ProAVX Tactical's transparent ballistic glazing system replaces factory glass with a precisely engineered laminate stack delivering full-perimeter certified ballistic resistance - with no visible difference from the original glazing.
Full Perimeter Coverage
Every glass surface - windshield, side glass, rear glass, and optional sunroof - is addressed as part of the complete system.
Spall Suppression
Inner polycarbonate layer captures glass fragments post-impact, preventing secondary injury to occupants from spalling.
Frame Seal Integration
Factory weather seals and rubber surrounds are maintained, preserving NVH characteristics and watertight integrity.
System Advantages
Why ProAVX Tactical
Ultra Lightweight
Systems starting at 90 kg total - compared to 400-700 kg for conventional steel-plated armoring - preserving vehicle performance, fuel economy, and suspension geometry.
Non-Invasive Installation
Zero cutting, welding, or structural modification. Our panels are engineered to integrate with factory mounting points, leaving no irreversible trace and maintaining factory warranty eligibility.
Maintains Appearance
Interior trim and exterior profile remain unchanged. Occupants and observers cannot distinguish the protected vehicle from its unarmored counterpart.
Certified Protection
Every material batch is independently tested at Oregon Ballistic Laboratories using strict European CEN 1063 ballistic standards. Full test documentation is provided with each installation.
System Gallery
Field-Proven Systems
Confidential Portfolio
Notable Deployments
Client identities are protected under strict non-disclosure. The following reflects the category scope of ProAVX Tactical deployments.
Protect What Matters Most
Speak with a ProAVX Tactical specialist to discuss your protection requirements. All consultations are strictly confidential.
Request ConsultationGet In Touch
Contact ProAVX
Our specialists are available to discuss your specific protection requirements. All inquiries are handled with the utmost discretion and confidentiality.
Phone305.647.9978
Emailinfo@ProAVX.com
Location1451 W. Cypress Creek Road, Suite 300, Fort Lauderdale, Fl 33309 (by Appointment Only)
Certifications
NIJ Certified CEN 1063 DOT Approved OBL Tested Made in USARequest Consultation
All fields are treated with strict confidentiality.